5.8G Two Channel 7" LCD Diversity Receiver

1.Two channel Receiver for best reception 2.Two groups frequencies can be offered 3.7" LCD Screen  5.8G Two Channel 7" LCD Diversity ReceiverFeatures:Two channel Receiver for best receptionTwo groups frequencies can be offered7" LCD ScreenBuilt-in Dual Receiver Automatically for best reception Automatic Antenna SwitchingDual buffered AV outputsCan receive 2 different channels at the same timeNot affect by 2.4GHz R/C RadiosAV Receiver with Diversity inputsSmall, light weight, durable1. Screen size: 7”2. Screen type: TFT LCD Screen/long life, LED backlight3. Resolution: 800*4804. Brightness: 450cd/m25. Contrast: 500:16. View Angle: 140/120degree (Horizontal/Vertical)7. Working Voltage: DV 7-12V(center positive) or 11.1V Li-battery8. Power Consumption: < 8w9. Size: 180mm x 120mm x 23mm10. Built-in 5.8Ghz Dual diversity receiver automatically for best reception11. Built-in 2CH 5.8Ghz AV output and 1CH AV input12. Support 9 languages menu selection13. Working temperature: -10°C~+ 65 °C

Screen	7 inch TFT LCD screen
View angle	140/120degree (Horizontal/Vertical)
Feature	diversity receiver with 7'' LCD
Working temperature	-10°C~+ 65 °C
Size	180mm x 120mm x 23mm
languages	9

 Specifications: Four groups frequencies can be offered(3rd groups as default):CH1: 5865MHz CH2: 5845MHz CH3: 5825MHz CH4: 5805MHzCH5: 5785MHz CH6: 5765MHz CH7: 5745MHz CH8: 5725MHz CH1: 5733MHz CH2: 5752MHz CH3: 5771MHz CH4: 5790MHzCH5: 5809MHz CH6: 5828MHz CH7: 5847MHz CH8: 5866MHzCH1: 5705MHz CH2: 5685MHz CH3: 5665MHz CH4: 5645MHzCH5: 5885MHz CH6: 5905MHz CH7: 5925MHz CH8: 5945MHz CH1: 5740MHz CH2: 5760MHz CH3: 5780MHz CH4: 5800MHzCH5: 5820MHz CH6: 5840MHz CH7: 5860MHz CH8: 5880MHzPackage content: 1x RC701 diversity receiver2x 5.8G 2dbi antenna1x Sunshade Cover1x power plug2x Avout cable2x power cable   How to Use: 1. Screw the antennas and then power the LCD screen. Power LED is on and RX1 and RX2 are flashing alternately. RF1 is to RX1 and RF2 is to RX2, better signal first. (See Figure1). RF1 and RF2 must be in the same Channel.2. Plug AV cable to RF1 AVOUT and connect the other end to the Monitor, then you can see the signals from RF1. So does the RF2 AVOUT. RF1 and RF2 must be in different channels to avoid signal interference. (see Figure2)3. Plug AV cable to any of the two AV IN ports, LCD will switch to the AV in Automatically.4. Buttons (See Figure1)1)POWER: LCD power on/off button.2)SOURCE: Selection for AV1 and AV23)MENU/DOWN: Setup-Brightness, Contrast, Color, Language, Image Rotation, Options-zoom 16:9/4:3, Auto turn off (5s/10s/OFF), Rest4)MINUS: Down5)PLUS: Up